|
|
|
|
|
|
|
|
Applies To: Model 500
In a nutshell:
You'll use the plug (#10) for power, and the active RJ45 jack (#1) for network connectivity (both circled in red).
You might possibly use the console-port (#3) someday for a maintenance function under the direction of tech-support.
The remaining connectors are not likely to be used.
All the ports in the photo have a number next to them, see the table.
|
|
|
Active Ethernet RJ45 (1) |
This RJ-45 connector (circled in red) provides auto-sensing 10/100 Mbps Ethernet connectivity for your internal network. |
|
Non-Active Ethernet RJ45 (2) |
This RJ-45 connector is not used and does not work, and in fact, should have a piece of tape covering it up to indicate its non-use. |
|
Power Connector (10) |
3-prong plug (circled in red) next to fan ... AC line voltage (115-230 VAC). |
|
Power Switch (9) |
Black Rocker ( l O ) next to plug. 1 is on, 0 is off. |
|
Thumb screws (8) |
Two thumb screws allow easy removal of the top cover for internal access. |
|
Mouse Port (Green) (5) |
Not Used |
|
Keyboard Port (Purple) (6) |
Not Used |
|
USB Ports (7) |
Not Used |
|
Console Port (Aqua) (3) |
This RS-232 port may be used to connect to a laptop or other device using the supplied serial cable. Thi is useful for troubleshooting or low-level management of the system. |
|
Video Port (Blue) (4) |
With the keyboard port, can be used to attach an SVGA monitor to the ePrism. This is useful for troubleshooting or low-level management of the system. |
